How To Repair Lhwinservice Errors

Hi,

Cheers for providing us the opportunity to assist yous.

As per the issue description yous are getting an error Diagnostics-Operation 100 Boot Performance Monitoring. These are events on the computer which happened during logging in or while running certain application. You may safely ignore those letters.

If you don't want to ignore information technology and desire to remove it you may try the methods provided below and meet if information technology helps.

Method 1

First disconnect any external devices continued to the computer except the mouse and keyboard. So check if all the physical connections to the reckoner are set correctly. If information technology is a laptop remove the laptop battery, await for 5 minutes and so connect dorsum the battery, check if it works.

Method ii

I would suggest you to boot the estimator in safe mode and check if the issue persists.

Footstep 1:

Refer to the link to boot in safe mode.

Advanced startup options (including safe style).

http://windows.microsoft.com/en-in/windows7/advanced-startup-options-including-rubber-mode

Step 2:

If your computer works fine in safe mode, I would advise y'all to perform clean boot.

Putting your system in Make clean Boot state helps in identifying if whatever third party applications or startup items are causing the issue. You need to follow the steps from the commodity mentioned beneath to perform a Make clean Boot.

How to perform a clean kick in Windows

http://back up.microsoft.com/kb/929135/en-us

Note : Refer "How to reset the reckoner to outset usually after clean kicking troubleshooting" to reset the computer to outset equally normal after troubleshooting.

Method 3

If issue nevertheless persist, I would suggest you to run a Startup repair to repair the corrupted startup system files and endeavour to kick in normal fashion. Refer to the steps provided below to run startup repair.

1. Restart your computer by clicking the Showtime, clicking the arrow side by side to theClose Downwards, and then clicking Restart.

two. Printing and hold the F8 central every bit your figurer restarts. Y'all demand to printing F8 earlier the Windows logo appears ( If the Windows logo appears, you'll need to attempt again by shutting down and restarting your figurer).

3. On the Advanced Boot Options screen, apply the arrow keys to highlight Repair your computer, so printing Enter.

four. Click the Operating arrangement that you want to repair, and so click Next.

5. In the Arrangement Recovery Options dialog box, click Startup Repair.

Additional Information:

You may refer to the commodity mentioned below to know more than about Startup repair.

Hope this would aid. If issue still persists post dorsum with current status of your figurer and upshot of proposed suggestion, nosotros will be happy to assist you.

Regards,

Ramesh Kumar.

Source: https://answers.microsoft.com/en-us/windows/forum/all/critical-error-100-in-event-viewer/f606bf89-3b71-4695-a26a-3eaffd31eade

Posted by: loveshrich.blogspot.com

Share this post