How To Remove Rear Windshield Wiper Jeep Wrangler

There are several reasons why you lot find some wrangler owners removing their rear windshield wiper. Some may remove and replace the whole wiper with a new one and others remove merely some parts of the wiper only such as the wiper blades or the arms only.

Only physical and electric damage to the wiper itself can lead to the replacement of the old wiper with a new one or a working one. But in case you desire to replace i on your jeep wrangler, you are at the right place. Read on the full article to know how to supplant rear windshield wiper on jeep wrangler.

Most Common reason why windshield wipers aren't working

Torn wiper blades

The condition of your wiper blades is directly proportional to how efficiently your rear windshield wiper works. If the rubber edges of the wipers are torn the wiper does not brand contact with the rear windshield thus the wiper is unable to clear off droppings and moisture efficiently.

The small parts of the rubber that are torn might also trap boosted dirt such as small stones that may scratch the windshield eventually leading to more costs when repairing. such dirt stuck on the worn-out wiper blades can pb to permanent damages to the rear windshield and you will demand to replace the rear windshield.

Solution – In this example, you should supercede the wiper blades immediately you notice that the blades have torn parts so that your rear windshield visibility is not affected that much.

How to replace wiper blades?

1. Lift the wiper arm off the window and rotate information technology with one paw directly towards y'all.
2. Once rotated the wiper blade will exist released from the arm and yous can take it off with ease.
3. Identify the pocket-size bar attachment on the new bract into the hook on the wiper arm.
4. Lock the bract into place by rotating the wiper away from you.
5. Once the arm has fallen into identify, pinch the blade against the wiper arm and it will snap into place.
6. Gently rest your wiper on the rear window and test it out earlier driving out.

Problems and solutions people face with rear winshield

Here, are the nigh common or abrasive problems wrangler owners face, who have a rear windshield. But, hither nosotros got the best solution for problems coming in handy with the rear windshield.

Heavy amounts of snowfall, water ice, or dirt on your rear windshield

The rear windshield wiper is only able to remove small amounts of snowfall ice and dirt. Also, heavy amounts of dirt stress the wiper and the wiper blades will eventually get bent. The wiper pivots likewise get damaged thus also damaging the manual of the wiper.

Solutions – Remove heavy snowfall, ice, and dirt from your rear windscreen before turning on your wiper. Y'all should besides park your wrangler in an enclosed space or cover it with a vehicle cover whenever y'all're parking it in an open up space.

Burnt out fuse

This is acquired by overloading the windshield wiper motor. The fuse is designed in such a style that information technology's a weak spot when the motor is overloaded and so the fuse blows instead of the motor which is expensive to replace compared to the fuse which is just a cheap fix.

Solution – Overloading the motor is caused by heavy lumps of snow, ice, or dust on the surface of the glass or the pin of the wiper. Check for anything that might limit the motility of the wiper and clean information technology off completely.

Failure to replace the fuse leads to damage to other electric components associated with the wiper such as the electrical wires from the ability source which is the battery and the electrical wires from the rear wiper switch to the wiper motor.

The wiper pivot screws are loose

 The wiper arm is connected to the wiper motor past a screw-on pivot. This spiral holds the artillery in identify and if information technology's a little loose the motor will plow the pivot but the arm will make very lilliputian movements or no movement at all.

Solution – The screw might take worn out threads then you lot only have to supervene upon information technology or if it'due south in proficient working conditions, just tighten it according to the torque requirements in your possessor's manual.

The wiper motor has stopped working

The wiper motor is just like whatsoever other electric motor meaning that it can brusque circuit whatsoever fourth dimension and when this happens, the wiper can not work at all and y'all won't accept any rearview equally yous can't clear anything blocking the view unless you do it yourself by wiping it off manually.

Solution – The only solution to this is replacing the motor right away if you nevertheless want to have the rearview which is very important if you are hauling a trailer on your wrangler or reversing.

Damaged rear wiper switch

The rear wiper switch on some wranglers is located on the right-paw lever behind the steering wheel while in some wranglers it's located on the musical instrument control console on the dashboard.

Most of the time the switch is damaged, it is mostly physical damage. Electric impairment is rare since the switch but acts as a usher between the bombardment and the motor.

Solution – The rear wiper can't be operational without the switch so the only solution is to replace the switch with a new one. Check with your local jeep technician on the appropriate way on how to supercede the rear wiper switch on your jeep wrangler.

If your wiper and wiper components are too damaged to continue working then you demand to replace the wiper. The blades and the arms are a quick fic simply the major issue is replacing the wiper motor or the wiper itself.

The rear wiper motor, unlike the front wiper motor, is less prone to article of clothing and tear since it is not oft used every bit compared to the front end wiper motor and is less probable to demand replacing.

Notwithstanding, when it needs replacing well-nigh wrangler owners tend to ignore it until a time that they come across that they need the rear wiper.

How to Replace the wiper motor?

Here, we accept listed out a complete guide for replacing the wiper motor. Follow the steps below to replace your wiper motor.

Disconnect the cables to the bombardment

Turn off your wrangler completely, open the hood and locate the battery terminals which are held by clamps with a unmarried nut that attaches the clench to the terminals.

Place the negative terminal so unscrew the clench on that terminal and slide the clench out. If y'all have whatsoever trouble with this, refer to the owner's manual on how to remove battery terminal clamps.

Disassemble the wiper from the motor

Pull the wiper away from the glass and start unscrewing the nut that holds the wiper to the motor. In one case the nut is out gently pulling the wiper out. This separates the wiper and the motor. Store the wiper in a safety place that it cannot fall as it is decumbent to damage when information technology takes a hit.

Removing the wiper motor

Get inside the machine and remove the screws that are found on the base of operations of the rear back window. These screws concur the motor in place and removing them will permit you to pull the motor off the window.

Installing a new motor

If you have removed the erstwhile motor with ease then installing a new one will likewise be piece of cake. Install the new motor in the same position as the former motor was and secure it firmly by replacing the screws that you lot took of the old motor.

Some new motors come up with new screws and you should apply them if they are there. When ownership a new motor ensure that information technology is specifically made for your Wrangler model or else it won't fit.

Reassembling the wiper

Identify the wiper into the same position as information technology was, for reference you can use images on your owner'south manual to position the wiper. Then secure it tightly into place using the screw that you had removed earlier.

Reconnect the car battery

Reinstall the concluding clamp back into place and secure information technology with the screw that is attached to it then close your hood and start your engine to bank check if you lot have correctly reconnected the negative concluding. At this bespeak, you tin also turn on your rear wiper switch to cheque if the switch is working.

How to Replace the wiper?

• Lift the wiper arm away from the rear window until information technology locks in an outward position. If it doesn't lock you have to hold it with one arm equally you lot piece of work with the other arm.
• Unscrew the screw that holds the wiper onto the rotor.
• Slide the wiper out and if the bract is in skilful condition, yous can take it out merely, in most cases, it is usually damaged if the wiper is also damaged.
• Concur the new wiper into position, you tin can utilize an image on the possessor's manual to correctly position and secure information technology with either the old screw or the new screw that comes with the new wiper.
• Turn on your engine and turn on your rear wiper to bank check if it's functional.

Determination

Replacing your rear windshield wiper or other components that tin lead to the malfunctioning of the rear wiper should exist a priority especially if you're driving in winter weather conditions or you lot're hauling a trailer. This is something you can practice by yourself provided yous use the specific components for your wrangler model.

Source: https://www.off-roading101.com/replace-rear-windshield-wiper-on-jeep-wrangler/

Share this post